Fire Safety - Nordstrom MiniCuret 7119745C Product Manual

1-4
Safety

Fire Safety

Part 7119745C
To avoid a fire or explosion, follow these instructions.
Use only those inks and varnishes that cannot form explosive
S
atmospheres when heated by the lamp head (i.e. inks and varnishes
whose safety data sheets specify a flammable limit must not be used).
Do not smoke, weld, grind, or use open flames where flammable
S
materials are being used or stored.
Provide adequate ventilation to prevent dangerous concentrations of
S
volatile materials or vapors. Refer to local codes or your material MSDS
for guidance.
Do not disconnect live electrical circuits while working with flammable
S
materials. Shut off power at a disconnect switch first to prevent
sparking.
Shut down all equipment immediately if you notice sparking or arcing.
S
Do not restart the equipment until the cause has been identified and
corrected.
Know where emergency stop buttons, shutoff valves, and fire
S
extinguishers are located. If a fire starts, immediately shut off the
system and exhaust fan.
Clean, maintain, test, and repair equipment according to the instructions
S
in your equipment documentation.
Only use replacement parts that are designed for use with original
S
equipment. Contact your Nordson representative for parts information
and advice or refer to the spares list in this manual.
MiniCure 08-07
E 2007 Nordson Corporation