Table of Contents
Advertisement
1-14
Safety
First Aid
Eyes -- Flush with plenty of water for 15 minutes, occasionally lifting the
eyelids. OBTAIN MEDICAL ATTENTION.
Skin -- Flush with plenty of soap and water for 15 minutes. Remove
contaminated clothes and shoes. OBTAIN MEDICAL ATTENTION.
Ingestion -- OBTAIN MEDICAL ATTENTION.
Inhalation -- OBTAIN MEDICAL ATTENTION.
Further details can be found on Guidance note EH 17 from the Health and
Safety Executive.
U.V. Ink and Generated Products
The relevant safety data sheets from the ink manufacturer must be followed
when handling UV inks.
With some solvent based inks and varnishes there is a potential for the
release of flammable substances during the printing process. These are not
suitable for use with a UV drying system. Always consult the manufacturer
and the manufactuter's data sheets before use with the UV drying system.
The materials used in UV inks and varnishes are of a toxic nature. Before
handling, it is essential all operators are conversant with the instructions
provided by the supplier of these materials as to their safe use and disposal.
During operation, there is a possibility that odor (a smell) may be generated.
This is taken away by the air cooling extraction system.
System Checks
Nordson UV will undertake to check an installation for ozone and UV
radiation.
Please contact our Service Department for availability and costs.
MiniCure 08-07
Part 7119745C
E 2007 Nordson Corporation
Advertisement
Table of Contents
