Table of Contents
Advertisement
1
Figure 4-1
1. Emergency Stop
2. Outlet Shield
E 2007 Nordson Corporation
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
2
3. System Isolator
In certain circumstances the lamp may be packed separately for transit.
Please see the maintenance section 'Lamp Installation and Removal' for
directions on how to fit the lamp.
The MiniCure must be professionally connected into a 3--phase + Neutral
supply. This must be capable of supplying the Voltage, Frequency and
Amperage specified on the rating plate of the unit (this is located on the
front of the unit).
The electrical supply to the machine needs to be connected to the 1.5m
connection cable that exits at the right hand side, next to the 'System
Isolator'.
Connect the live supply cables (L
suitable fixed wall supply box.
The earth cable (PE) must also be connected.
MiniCure 08-07
Installation
3
4
4. Substrate Collection Tray
, L
, L
,) and the Neutral cable (N) into a
1
2
3
4-1
Installation
Section 4
Fig NUV2A
Part 7119745C
Advertisement
Table of Contents
