Foscam FI9804WM User Manual page 9

This camera supports I/O alarm, you can go to Settings-Alarm - I/O page to configure it.
NOTE:
Only FI9805E has this section .
2 LAN
10/100M adaptive Ethernet interface. Through this interface, IPCAM can be connected with various network
devices, such as hub, router, etc.
3 Reset button
Press and hold on the reset button for 5 seconds. Releasing the reset button, the password will back to the
factory default administrator password. The default administrator user is admin with no password.
4 Power Interface
Connect the external power adapter, request for 12V/2A or 12V/1A power.
5 Audio input interface:
The jack is used to plug external input device such as sound pick up device directly. Here microphone cannot
directly insert to the interface, it must connect to adapter first.
NOTE:
FI9803P,FI9803EP,FI9903P, hasn't this section .
6 Audio output interface:
The jack is used to plug external output device such as loud speaker directly. Here microphone cannot directly
insert to the interface, it must connect to adapter first.
NOTE:
FI9803P,FI9803EP,FI9903P, hasn't this section .
7 RS485 Cradle head interface
This camera supports the standard 485 cradle head protocol(Pelco-D and Pelco-P). Please configure the
RS485 protocol corresponding information first (go to Settings- PTZ - RS485 Configuration page and do
settings), or else the cradle head may cannot work.
NOTE:
Only FI9805E has this section .
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: 86 755 2674 5668 Fax:
Tel: 86 755 2674 5668 Fax:
Technology Co., Limited
Technology Co., Limited
86 755 2674 5168
86 755 2674 5168
Figure 1.5
www .foscam.co
www .foscam.co
1– input
2- input
3- output
4- output
m
m
7