Foscam FI9804WM User Manual page 63

Setting IO alarm
On the IO page, Enable the I/O alarm, select the "Send E-mail"and "Snapshot" before you have configured
the mail and FTP.
Click this button and
select all time range.
If an IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning
sound, alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop alarming. If IO
alarm is triggered again after alarm interval, IO alarm output device will be restart.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: 86 755 2674 5668 Fax:
Tel: 86 755 2674 5668 Fax:
Figure 4.57
Figure 4.58
Technology Co., Limited
Technology Co., Limited
86 755 2674 5168
86 755 2674 5168
www .foscam.co m
www .foscam.co m
61