Setting Broil & Searing Grill - Kenmore 790.7755 Use & Care Manual

Dual fuel range
Table of Contents

Advertisement

Setting Oven Controls
Setting Broil (Dual Fuel Range)
The __B[oilj_pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even coverage.
The Broil feature is preset to start broiling at 550°F, however, the Broil feature temperature
may be set at any temperature
between 400°F and 550°F.
The broil pan and broil pan insert used together allows dripping grease to drain and be kept away from the high heat of the
oven broiler. DO NOT use the broil pan without the insert (See Fig. ). DO NOT cover the oven racks with aluminum
fo& The exposed grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn the oven OFF. If the fire continues, throw
baking soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and water
can cause a grease fire to spread and cause personal injury.
INSTRUCTIONS
PRESS
DISPLAY
To set the oven to broil at the default
setting
(550°F):
1.
Place the broiler pan insert on the broiler pan. Then place the
food on the broiler pan insert. DO NOT use the broiler pan
without the insert.
2.
Arrange the interior oven rack and place the broiler pan on the
rack. Be sure to center the broiler pan directly under the broiler
element. Close the oven door, Preheat the oven for 4 minutes.
3.
Press B___.
(See Fig. 1).
4.
If a lower broil temperature is desired (minimum broil
temperature setting is 400°F), press the desired temperature
before continuing to step 5.
5.
Press _--_'_. The oven will begin to broil. "BROIL" and "550°"
will appear in the display (See Fig. 2).
6.
Broil on one side until food is browned; turn and cook on the
second side. Season and serve. Note: Always pull the rack out
to the stop position before turning or removing food.
7.
To cancel broiling or if finished broiling press O
(See Fig. 3).
Recommended
Broiling
Times and Searing Grill (Optional
accessory)
Use the following table for approximate broiling times. Increase or
decrease broiling times, or move the broiling pan to a different rack
position to suit for doneness. If the food you are broiling is not listed
in the table, follow the instructions provided in your cookbook and
watch the item closely. Use the Searing Grill for meats and steaks if
desired. Before placing the meat, be sure to heat the Searing Grill
using Broil for 10 minutes. Cook times should be reduced 1-2
minutes per side when cooking with the Searing Grill. Place Searing
Grill on top of Broiler Pan and insert for meats and steaks (Fig. 6).
@
Fig. 1
ill
Fig. 2
Fig. 3
Broiling
Table (Refer to Fig. 4)
Food
Rack
Item
Position
....
Sieak i;; ihick ..............................................................................................
5ihor6ih
5th or 6th
Pork Chops 3/4" thick
5th
Chicken - Bone In
4th
Chicken - Boneless
5th
Fish
5th
Shrimp
4th
Hamburger
1" thick
6th
5th
Temp
Cook Time
Setting
1st side
2ndside
Doneness
550° F
6:00
4:00
Medium
550 ° F
7:00
5:00
Medium-Well
550 ° F
8:00
6:00
Well
450 ° F
20:00
10:00
Well
450 ° F
8:00
6:00
Well
500°F
as directed
as directed
Well
550°F
as directed
as directed
Well
550 ° F
9:00
7:00
Well
550 ° F
10:00
8:00
Well
23
Searing
Grill
Fig. 5
Broil Pal
7
& Insert
rig.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.7755 series

Table of Contents