Table of Contents
Advertisement
Self= Cleaning
*
Setting Flex Clean
*
Setting Delay Flex Clean
INSTRUCTIONS
1.
The time of day, "HOT", "DOOR LOCKED" and "CLEAN"
icon
will remain in the display (See Fig. 7).
2.
Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED"
icon is no longer displayed, the oven
door can then be opened.
PRESS
DISPLAY
Fig.7
Stopping
or Interrupting
a Self-Cleaning
cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1.
PressQ.
Q
2.
Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed,the oven door
Fig.8
can then be opened (See Fig. 8).
iMPORTANT
NOTES when using the Self-Clean feature:
1. If a Self-Cleaning-Cycle
has started but not finished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
2. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see instructions for setting the control for the 24
hour time of day display mode.
34
Advertisement
Table of Contents
