Table of Contents
Advertisement
Setting Oven Controls
•
Setting the Clock
•
Changing between 12or24 hourdisplay
•
Silent Control Operation
Setting
the Clock
The CLOCK _-Q_
pad is used to set the clock. The clock may be
set for 12 or 24 hour time of day operation. The clock has been
preset at the factory for the 12 hour operation. When the range is
first plugged in, or when the power supply to the range has been
interrupted, the clock in the display will flash (See Fig. 1).
Fig. 1
INSTRUCTIONS
To set the
clock
(example
below
for
1:30):
1.
Press (f_").
"CLO" will appear in the display (See Fig. 2).
,
Press
pads to set the time of day to 1:30
Press _.
"CLO" will disappear and the clock
(See Fig. 3).
will start (See Fig. 4).
Changing
between
12 or 24 hour time of day display:
1.
Press and hold _
for 6 seconds untill "12h" or"24h"
appears in the display.
Press _C_aX,_ to switch between the 12 and 24 hour time of day
2.
display.
"12h"
or "24h" will be displayed
(See Figs. 5 or 6).
3.
Press (_
to accept the desired change or press @
to
reject the change.
4.
Reset the correct time as described in To set the clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 00:00 through 23:59 hours.
Setting
Silent Control
Operation
PRESS
G
(_for
6 seconds
@
DISPLAY
Fig. 2
F g 3
Fig. 4
Fig. 5
Fig. 6
The DELAY START (,._a_y)and FLEX CLEAN (,.C_a_ pads control the Silent Control operation feature. The Silent Control
v
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change control from normal sound
to silent
control operation:
1.
To tell if your range is set for normal or silent operation press
and hold d_
_ for 6 seconds. (See Fig. 7)
Press _
to switch between normal sound operation and
2.
silent operation mode. The display will show either "SP" (See
Fig. 8) or" ==" (See Figs. 8 or 9).
for 6 seconds
@
Fig. 7
Fig. 8
,
If "SP" appears (See Fig. 8), the control will operate with normal
sounds and beeps. If "= =" appears (See Fig. 9), the control is
set for silent operation mode.
to accept the change or press @
to reject
Press
the
change.
15
°rO
Fig. 9
Advertisement
Table of Contents
