Christie DWU951 User Manual page 100

8. Other Functions
8.4 Command Control via the Network
Automatic Connection Break
communication for 30 seconds after being established.
Authentication
The projector does not accept commands without authentication success
when authentication is enabled. The projector uses a challenge response type
commands to send.
and send the data.
6) When the sending data is correct, the command will be performed and the
NOTE
authentication data can be omitted when the same connection.
DWU951/DHD951/DWX951/DXG1051
User's Manual - Network Guide
98
020-000662-02 Rev. 1 (06-2014)