Specifications; Performance - Sanyo MDF-C8V Service Manual

SPECIFICATIONS

Name
Model
Outer dimensions
Applicable model
Applied gas
Temperature control
Door switch
Indicator
Accessories
Power source
Battery
Weight
Optional component
Note Design or specifications will be subject to change without notice.
The battery for power failure alarm is an article for consumption.
It is recommended that the battery will be replaced about every 3 years.
representation or agent at the time of replacement of the battery for recycling.

PERFORMANCE

Temperature range
Duration
Maximum power consumption
Usable environment
Note:
The back-up system is operated with an installed battery in the event of power failure.
About two-day operation of a freezer is necessary to full charge the battery.
15
Back-up System for Ultra-Low Temperature Freezer
CVK-UB4
Mounting kit (except for gas cylinder)
Tank connecting tube: mm size
AC 115 V / AC 230 V (supplied from a freezer)
DC 24 V, 4 Ah, Automatic recharge
Approx. 13 hours (liquid CO
(ambient temp.; 30
Temperature; -5 to +30
W286 x D87 x H520 mm
MDF-C8V
Liquid CO gas
2
Gas type thermostat
Door operation-related ON/OFF
Back-up switch-related ON/OFF
Mounting kit (except for gas cylinder)
Tank connecting tube: inch size
11 kg
Mounting plate (MDF-UBK)
o
-50 to –70 C
gas cylinder of 30 kg)
2
o
C, set temp.; -70
6 W
o
C, Humidity; Less than 80% RH
88
CVK-UB4(I)
Contact Sanyo sales
o
C, no load,)