Setting The Oven Controls - Kenmore 790.4906 Use And Care Manual

Setting Oven Controls
Setting Preheat
The PREHEAT _ pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and
then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not necessary
when roasting or cooking casseroles. The oven can be programmed to preheat at anytemperature between 170°F to 550°F.
iNSTRUCTiONS
To set the Preheat temperature for 350°F
1. Arrange the interior oven racks.
2. Press _).
"- - - o,,and "BAKE" will appear in the display
(Figure 1).
3. Press _ _) _"_. "350 °'' and "BAKE" will appear in the
display (Figure 2).
4. Press_-ART_'_. "PRE", "BAKE"and
"_-_" Will appear in the display
as the oven heats and reaches 350°F (Figure 3).
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will beep and the "PRE" light will turn off
and oven temperature will be displayed (Figure 4). If you missed
hearing the beep, you can tell that oven has reached preheat temperatu re
ifyou see the oven temperature showing in the display. Once the oven
has preheated, PLACE FOOD IN THE OVEN. The "BAKE" light will
stay on.
Press _ when baking is complete or to cancel the preheat feature.
,_r
To change Preheat temperature while oven is
preheating (example: changing from 350 to 425°F)
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
1. While preheating, press _.
"BAKE" will flash in the display
(Figure 5)
2. Enter the new preheat temperature. Press @ _ @.
"425 °'' and "BAKE" will appear in the display.
3. Press(_. "PRE"and"_--_"willappearinthedisplayasthe
oven heats to 425°F (Figure 6). A beep will sound once the oven
temperature reaches 425°F and the display will show "425 °'' and
"BAKE" (Figure 7).
baking is complete press _. 4. When
PRESS DISPLAY
@
QQ@
@
Q
db(2bQ
@
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
13