Kenmore 790.4906 Use And Care Manual page 31

Electric built-in oven
Table of Contents

Advertisement

General Care & Cleaning
of glass shield
and remove it.
Halogen
Light Bulb
Changing
the Oven
Light
An interior oven light will turn on automatically
when the oven door is
opened. The oven light may be turned on when the door is closed by using
the oven light switch located on the control panel.
The lamp is covered with a glass shield. The glass shield can be removed
to be cleaned
manually
or to change
oven light. THIS GLASS SHIELD
MUST BE IN PLACE WHENEVER
THE OVEN IS IN USE.
To replace
the light bulb:
CAUTION:
BE SURE THE OVEN iS COOL.
1.
Turn the power off at the main source.
2.
Wear a leather-faced
glove for protection against possible broken glass.
3.
To remove the glass shield, pull the back side of the shield toward the
inside of the oven in a manner to lift it up from the oven side.
4.
The glass shield should come out easily by pushing a little toward front
of the range.
5.
Replace halogen light appliance
bulb taking care not to touch the bulb
with your bare fingers. Touching bulb with your skin can leave a film on
the bulb that causes it to burn out quickly.
6.
Replace glass shield in opposite order and manner of removal.
Cooking Table
_
CONVECTION BAKE pad
Food Type
Decrease in normal
cook times
Frozen foods, pies,
15-25 %
pastries and pizza
Refrigerator cookies
15-35 %
Refrigerator biscuits
15-30 %
Rolls & Breads
20-25%
Fresh Pies/Pastries
10-20 %
Begin with the maximum reduction in cook time
and adjust as needed.
*Recommended
reduction in cook time based on
brands of food items tested. Cook time may vary
with your specific brand of food item.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.4906 series

Table of Contents