Kenmore 790.4906 Use And Care Manual page 26

Electric built-in oven
Table of Contents

Advertisement

Self-Cleaning
What to Expect during Cleaning
While the oven is in operation, the oven heats to temperatures much higher than
those used in normal cooking. Sounds of metal expansion and contraction are
normal. Odor is also normal as the food soil is being removed. Smoke may appear
through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame and cause more
smoke and odor than usual. This is normal and safe and should not cause alarm. If
available, use an exhaust fan during the self-cleaning cycle.
To Start the Self=Clean
Cycle
The FLEX CLEAN _
pad controls the Self-Cleaning feature, if you are planning
to use the oven directly after a self-clean cycle remember to allow time for the oven
to cool down and the oven door to unlock. This normally takes about one hour. So a
3 hour self-clean cycle will actually take about 4 hours to complete.
*it is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for
average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).
INSTRUCTIONS
PRESS
NOTE: A smoke eliminator in the
oven vent converts most of the
soil into a colorless vapor.
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.
DO NOT force the
oven door open. This can damage
the automatic door locking system.
Use caution and avoid possible
burns when opening the door after
the
Self-Cleaning
cycle
has
completed. The oven may still be
VERY HOT.
DISPLAY
To set the controls
for a 3 hour Self-Cleaning
cycle
to start immediately
and shut off automatically
1.
Be sure the clock is set with the correct time of day and the oven
door is closed.
Press _).
"CLEAN",
"1" and "TIME" will flash in the display
_)
2.
(Figure 1). The control will automatically clean for a 3 hour period
(default self-cleaning cycle time). Note: if a 2 or 4 hour clean time
isdesired,
press
0 @ @ for 2hour or p ress
(Z)
@
for
4 hour clean time. Set the
time based
a
cleaning
on the amount of soil: light, medium or heavy (* See above).
3.
Press STA_
.The "OVEN" once thedoorhas
locked, "CLEAN",
"LOCK"
and "_---N]"will appear in the display (Figure 3).
4.
When flex clean finishes, lock will remain in the display until the
door has unlocked and "END" will appear (Figure 4)
Figure 1
Figure 2
Figure 3
Note: Allow about 15 seconds for the oven door lock to close.
When
the
Self=Clean
Cycle is Completed
t.
The time of day and "END" will remain in the display (Figure 4).
2.
Once the oven has cooled down for approximately t HOUR, and
"END" is no longer displayed, the oven door can then be opened
(Figure 5).
Stopping
or Interrupting
a Self-Cleaning
Cycle
if it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
1.
Press @.
2.
The oven door can only be opened after the oven has cooled down
for approximately
1 HOUR, and "END" is no longer displayed
(Figure 5).
@
Figure 4
Figure 5
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.4906 series

Table of Contents