Temperature Setting - Baumatic BWC157 User Manual

it will change to display the real temperature of the inside cabinet after 10 seconds
without being touched�
● When the temperature probe is out of order, the display window will show with "HH"
or "LL" instead of a digital figure while continuous buzz sound will be heard� In case
of this happens, this appliance is considerately designed to keep periodical running
of compressor and fans which helps to keep the coldness of the inside cabinet to
protect your stored wines�
Warning: To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical running can not
ensure the appliance to achieve the temperature you have set�
„ TEMPERATURE SETTING
For Single Zone
● The temperature setting range is 5-22ºC (41-72ºF)� Beverage Centre model BBC6178
is 2-20ºC (36-68ºF)
● Directly touch the
● The first touch on
● Touch the symbol
contrary, touch the symbol
● The digital will change to display the real temperature of the inside cabinet after
10 seconds without being touched�
For Dual Zone
● The temperature setting ranges are 5-12ºC (41-54 ºF) for the upper zone and 12-22ºC
(54-72ºF) for the bottom zone�
● You need to select the set zone by touching the symbol
symbol or
when it is ready to be set�
● The first touch on symbol
in the digital window�
● Touch the symbol
contrary, touch the symbol
● The digital will change to display the real temperature of the inside cabinet after
10 seconds without being touched�
Note:
For the first time to use the appliance or to restart the appliance after having been
shut off for a long time, you may find a few degrees variance between the set
temperature and the displayed temperature� It will go back to normal after a few
hours running
or symbol to set the wine cooler temperature as you want�
or symbol will recall the previous set temperature displayed�
to increase the set temperature by 1ºC (or by 1ºF)� On the
to decrease the set temperature by 1ºC (or by 1ºF)�
to set the desired temperature� The zone temperature will flash
or will recall the previous set temperature displayed
to increase the set temperature by 1ºC (or by 1ºF)� On the
to decrease the set temperature by 1ºC (or by 1ºF)�
9
INSTRUCTION MANUAL
before touching the