Switching On The Appliance And Setting The Temperature; Changing Between Fahrenheit And Celsius - Baumatic BWE41BL Instruction Manual

Switching on the appliance and setting the temperature

o When the appliance is connected to your mains supply, the
temperature LED display (E) will show the factory pre-set
temperature of +12°C.
o Use the temperature increase (A) and temperature decrease (B)
buttons to set the temperature that you require. Each press of
these buttons will adjust the temperature on the temperature
LED display (E) by one degree.
o Whilst you are setting the temperature of the cooling zone, the
temperature LED display (E) will flash. When you stop pressing
the temperature buttons, after 3 seconds the display will stop
flashing and the temperature of the cooling zone will be set.
o The temperature LED display (E) will show the temperature that
is currently being registered by the cooling zone.

Changing between Fahrenheit and Celsius

o You can select whether the temperature LED display (E) shows
Celsius or Fahrenheit. The Celsius/Fahrenheit indicator neons will
light to show whether Celsius or Fahrenheit is currently shown.
o To alter what the temperature LED display (D) is showing, press
the temperature increase (A) and temperature decrease (B)
buttons simultaneously.
12