Kenmore Microwave Oven Use And Care Manual page 17

Micro/convection oven
Hide thumbs Also See for Microwave Oven:
Table of Contents

Advertisement

RECALL
AND CHANGE
OF SETTINGS
i
To
Recall
a Setting
To check
the Setting
for a given stage, touchMEMORY/RECALL
once or more until the correct Stage
Light and Indicator
Light turn on. The set Time, Temperature
or Oven Temperature
for that stage will
show in the Display Window.
To check
the Microwave
Cooking
Power leve!, touch MICRO CONTROL.
To check the Oven Temperature,
touch OVEN TEMP/PRE-HEAT.
And so on.
To check Settings
while the Oven is running, touch desired pad to recall Setting for operating
stage.
To recall a future
stage, touch STOP, follow directions
above, and touch START to continue
cooking.
To recall Time of Day during cooking,
touch TIME OF DAY, and it will show in the Display Window.
To
Change
a Setting
Recall the Setting
to be changed
by .following directions
above and make the change as follows:
TIME .....................................................
Touch "0" until only one "0" shows in the
(MICRO
TIME, CONVEC
TIME, MICRO!CONVEC
TIME)
Display Window. Set Cooking Time.
TEMPERATURE
CONTROL
................................
Set Cooking Probe Temperature.
(MICRO
TEMP,
CONVEC
TEMP, MICRO/CONVEC
TEMP)
MICRO
CONTROL
........................................
Set Microwave
Cooking Power level.
To reset to "HI", set "99".
OVEN TEMP/PRE-HEAT
...................................
Set Oven Temperature.
PAUSE
BETWEEN
STAGES
Some recipes
require
stirring, turning and adding or removing of foods between
stages. To set the oven to
stop between
stages,
touch PAUSE rather than MEMORY/RECALL
when setting the oven. After the
pause,
to restart
the oven, touch START.
REG ULAR
TIMER
Your Oven also has a timer that can be used for non-cooking
functions.
When used as a regular timer,
the Oven
is not running,
the timer is simply counting
down.
For detailed
instructions
on using this timer, see below.
To use
the Regular
Timer
feature:
I. Touch
CLEAR.
2. Touch
MICRO TIME.
3. Touch
numbers
for the time.
4. Touch
MICRO
CONTROL.
5. Touch
"'0" (power level 0).
6. Touch
START. The time will begin counting
down in the display window with no cooking or heating in
the oven.
A tone will sound and the word "End" will show in the display window for 2 seconds
when the time is
over.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

86951

Table of Contents