Installation Checklist - Sub-Zero Built-In Refrigeration Installation Manual

Installation Checklist

Installation Checklist
The importance of the installation of the Sub-Zero built-in
unit cannot be overemphasized. Proper installation is the
responsibility of the selling dealer or installer.
IMPORTANT NOTE: To ensure a safe and proper installa-
tion, the following checklist should be completed by the
installer to ensure that no part of the installation has been
overlooked.
Any questions or problems regarding the installation
should be directed to your Sub-Zero dealer or Sub-Zero
customer service at 800-222-7820. You may also check
the contact & support section of our website, subzero.com.
INSTALLATION CHECKLIST
Has the packing material been removed?
Turn the unit on. Is it operating properly?
If not, is the unit plugged in? Is the control turned on?
Is the water supply line connected and not leaking? Is
the water supply turned on and ice maker control on?
Have the anti-tip brackets been installed securely and
properly engaging the unit?
Is the unit leveled properly on a solid, level floor? Is the
kickplate installed?
Has the drain pan been installed properly?
Are panels attached securely and properly aligned?
Have the door(s) been aligned for proper appearance
and operation?
Has the water filter cartridge been installed?
Has a filter bypass been ordered (only for homes with a
reverse osmosis system)?
Does your customer understand the unit's operation?
Have you given your customer the warranty package?
Have any installation or service problems been noted
on the product registration card? Has the registration
card been mailed in?
Have stainless steel door(s) been inspected for any
imperfections? This is to be done by the dealer or
installer with the customer upon completion of the
installation. Classic, platinum and carbon stainless
steel panels are covered by a limited 60-day parts and
labor warranty for cosmetic defects.
41
subzero.com