Sub-Zero Built-In Refrigeration Installation Manual page 19

Built-In Installation
19
subzero.com
Level the Unit
Once the unit is in position, extend the front leveling legs
down by turning the legs clockwise to adjust the height.
The rear height adjustment can be made from the front of
3
the base. Use a / " socket to adjust the rear rollers. Turn
8
3
the / " hex bolt clockwise to raise the unit or counter-
8
clockwise to lower it.
When the unit is leveled properly, or squared off, door FRONT
LEVELING LEG
and/or drawer adjustments are less likely to be necessary.
Refer to the illustration below for location of the rear roller
REAR
ADJUSTMENT
base adjustment.
IMPORTANT NOTE: Be sure to reference leveling of the
Rear roller base adjustment.
unit to the floor and not to surrounding cabinetry. This
could affect the operation of the unit, such as door
closing.