Install The Motherboard; Cpu Installation - SOYO SY-K7VTA Pro Quick Start Manual

Install the Motherboard

To perform the installation of your new SY-K7VTA PRO Motherboard, follow the steps
below:

CPU Installation

Step 1.
Mark your CPU Frequency: Record the working frequency of your CPU that
should be clearly marked on the CPU cover.
200MHz FSB DDR transfer on Athlon
750 MHz (100 x 7.5) 800 MHz (100 x 8.0)
1000 MHz (100 x 10.0) 1.1 GHz (100 x 11.0)
200MHz FSB DDR transfer on Duron
600 MHz (100 x 6.0) 650 MHz (100 x 6.5)
850 MHz (100 x 8.5) 900 MHz (100 x 9.0)
266MHz Front Side Bus DDR transfer on Athlon
1 GHz (133 x 7.5)
CPU Mount Procedure:
have purchased separately, follow these instructions.
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
SY-K7VTA PRO Quick Start Guide
850 MHz (100 x 8.5)
1.2 GHz (100 x 12.0)
700 MHz (100 x 7.0)
950 MHz (100 x 9.5)
1.13 GHz (133 x 8.5)
To mount the AMD
1 1
3
7
900 MHz (100 x 9.0)
1.3 GHz (100 x 13.0)
750 MHz (100 x 7.5)
1.2 GHz (133 x 9.0) 1.33 GHz (133 x 10.0)
& Athlon/Duron TM processor that you
®
2
4
950 MHz (100 x 9.5)
800 MHz (100 x 8.0)