Quick Bios Setup - SOYO SY-K7VTA Pro Quick Start Manual

Hide thumbs Also See for SY-K7VTA Pro:

Table of Contents

SY-K7VTA PRO Quick Start Guide

Quick BIOS Setup

This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead,

CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The

[SOYO COMBO SETUP] combines the main parameters that you need to configure, all in

one menu, for a quick setup in BIOS.

After the hardware installation is complete, turn the power switch on, then press the <DEL> key

during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS

SETUP UTILITY will be shown on the screen. Then, follow these steps to configure the CPU

settings.

Select [STANDARD CMOS SETUP]

Step 1.

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to "Auto".

Select [LOAD Optimized DEFAULT]

Step 2.

Select the "LOAD Optimized DEFAULT" menu and type "Y" at the prompt to load the BIOS

optimal setup.

Select [SAVE & EXIT SETUP]

Step 3.

Press <Enter> to save the new configuration to the CMOS memory, and continue the boot

sequence.

Table of Contents