SOYO SY-K7VTA Pro Quick Start Manual page 9

Set CPU jumper
Step 2.
CPU Ratio Adjustment Setting (RJ1)
For certain AMD CPUs, the multiplier is not locked such that setting a ratio/multiplier
higher than specified on the CPU is possible. For technical details read the following:
Refer to the following table to set the Frequency Multiplier of your CPU.
Frequency Multiplier
Setting
Auto
Manual
If you set ratio to manual and configure the RJ1 jumper to the settings that match your CPU speed, as follow
table:
RJ1 1 2
off
5 on
5.5 on off
6 on off
6.5 on off
7 off on
7.5 off on
8 off on
8.5 off on
Note: SOYO does not guarantee system stability if the user over clocks the
system. Any malfunctions due to over-clocking are not covered by the warranty.
CPU FSB Setting (FJ1,FJ2)
The FSB Frequency can also be set through jumpers FJ1 and FJ2 and it may therefore
differ from the Frequency the CPU specifies. Doing so may however force your CPU to
operate out of its specifications and therefore SOYO can not guarantee the proper
functioning of your system.
SY-K7VTA PRO Quick Start Guide
J2
Short Pin1-2
1 2 3
Short Pin2-3
1 2 3
3 4 RJ1
on on 9
on off 9.5
off on 10
off off 10.5
on on 11
on off 11.5
off on 12
off off 12.5
9
J3
Short Pin1-2
1 2 3
Short Pin2-3
1 2 3
1 2 3 4
off off
on on
off off on off
off off off on
off off off off
on on on on
on on on off
on on off on
on on off off