Maintenance - CompuLab fit-PC2 Owner's Manual


It is recommended to secure the power plug using the adjacent screw.

Connect the power supply to the AC cord and plug the cord into AC outlet. The power LED
should light up as the fit-PC2 boots.
Booting Linux (applies to fit-PC2 Linux)
Linux loads automatically on power up.
Login:
Username: fit
Password: 111111
Booting Windows 7 (applies to fit-PC2 Win7)
Upon first power-up, you will be guided through the Windows Welcome procedure which is self-
explanatory. The Windows 7 serial number is printed on the Windows 7 label on the bottom of your fit-
PC2.

Maintenance

The fit-PC2 requires no maintenance. You should not take the fit-PC2 apart - this will void its warranty.
The following operations can be conducted by the user:
Affixing rubber feet
You should stick the rubber feet to the bottom of the fit-PC2 to protect the supporting surface.
Recommended rubber feet placement is shown below:
6