CompuLab fit-PC2 Owner's Manual page 10

Audio – enable or disable audio
o
SDIO – enable or disable SD socket
o
Gigabit LAN – enable or disable Ethernet
o
LAN PXE BOOT – if enabled, PXE boot over LAN will be attempted
o

Video (Intel IGD) Control Sub-Menu
Graphic Memory Aperture Size – [256MB | 128MB] Select how much memory to
o
allocate for graphics. Main memory available is reduced by the amount chosen.
Security
This section allows the setting of:

Supervisor password for protecting setup utility

User password for protecting fit-PC2 boot
If you wish to clear a password, set a new, blank password.
Boot
Select a boot sequence between the built-in HDD, USB thumb drive (USB key), USB CDROM, USB
HDD, USB Floppy (FDC) and SD.
Booting over LAN (PXE) is enabled separately (see above).
Exit
Standard options for saving/discarding BIOS changes or reloading BIOS defaults.
10