Advertisement
9. To configure the Wireless connection, ensure the following settings are
entered:
Wireless check box ticked to Enable
SSID is named (this will be any name you wish to give to your Wireless
Network. By default this is set to
Network Authentication: Mixed WPA2/WPA-PSK
WPA2 Pre Shared Key: This will ensure that in order to connect to your
wireless network a password will be required. Please enter a password
between 8 - 63 characters; this can contain letters and numbers
10. You will now receive a message that the process is finished
11. Once connected the Internet, the modem light will turn on and flash to
indicate there is Internet traffic. Try browsing to a website such as
www.google.com to test your connection
wlan-ap
)
Advertisement
