Operation - Gastroback Home Culture Operating Instructions Manual

Operation

Before First Use
Remove all promotional materials and packing as well as any foreign objects, but do not
remove the model label.
Before first use and after a long period of storage, clean the processing tools in warm soapy
water (see Care and Cleaning).
Using the Hand Mixer
WARNING: Always switch OFF the appliance, wait until the motor stops completely and
unplug the appliance before lifting the processing tools out of the food, assembling/disas-
sembling the processing tools or laying down the appliance. Each processing tool is assig-
ned only to one of the two tool holes in the bottom of the motor housing. Insert the proces-
sing tool with washer on the shaft in the wide tool hole. Only insert the processing tool
without washer into the narrow tool hole. Only use matching pairs of processing
tools to avoid damage of the appliance.
Before connecting the appliance to the mains power supply, always ensure that the appli-
ance is assembled correctly, according to the following instructions. Do not touch the pro-
cessing tools with your hands or any objects (i.e. hair, clothes, cooking utensils), when they
are mounted and the appliance is connected to the mains power supply. Before switching
ON, immerse the processing tools in the food, to avoid excessive splashing and dripping of
liquids onto the appliance.
CAUTION: Do not use any fragile vessels with the appliance (i.e. fine dinking glasses or
china). It is recommended to use suitable high-sided, medium-sized stainless steal or plastic
vessels. During operation, prevent the processing tools from touching the interior walls of the
vessel.
1. Prepare your food in a sufficiently large and high-sided vessel.
2. Ensure, that the appliance is switched OFF (speed control position '0') and unplugged.
3. Select the suitable pair of processing tools: dough hooks or whisks (see Processing Tools
and Eject Button).
4. Insert the shafts of the processing tools in the tool holes in the bottom of the motor hou-
sing, twisting slightly until they engage.
Each processing tool is assigned only to one of the two tool holes in the bottom of the motor
housing. The processing tools with washer on the shaft can only be inserted in the wide tool
hole. The shafts must be locked on firmly to the motor housing and may not fall or wobble.
13