Table of Contents
Advertisement
Important Safeguards
Carefully read all instructions before operating and save the instructions for further referen-
ce. Do not attempt to use this appliance for any other than the intended use, described in
these instructions. Any other use, especially misuse, can cause severe injuries or damage by
electric shock, fire or moving mechanical parts.
Any operation, repair and technical maintenance of the appliance or any part of it other
than described in these instructions may only be performed at an authorised service centre.
Please contact your vendor.
Safeguards for Daily Operation
• The appliance is designed for normal household quantities. Do not operate or store the
appliance outdoors or in damp or wet areas. Do not operate the appliance in continuous
operation for more than 6 minutes to avoid overheating. If processing large quantities of
food, interrupt operation after 6 minutes and unplug the appliance for at least 10 minutes,
to let the motor cool down.
• Do not attempt to operate the appliance using any parts or accessories not recommended
by the manufacturer (i.e. processing tools). Especially the whisks and dough hooks are sen-
sitive to careless handling. Do not operate the appliance, when the appliance or any part
of it is likely to be damaged, to avoid risk of overheating, fire, electric shock or any other
damage or injuries to persons. Do not attempt to open the motor housing or to repair the
power cord. Check the entire appliance regularly for proper operation. The appliance is like-
ly to be damaged if the appliance was subject to inadmissible strain (i.e. overheating,
mechanical or electric shock) or if there are any cracks, excessively frayed parts, distortions
or the gear stalls or sticks. In this case, immediately unplug the appliance and return the ent-
ire appliance (including all parts and accessories) to an authorised service centre for exa-
mination and repair. During operation do not block the ventilation slits at the front and back
of the appliance.
• Always IMMEDIATELY unplug the appliance after each operation and befo-
re assembling or disassembling the whisks or dough hooks and before lay-
ing down the appliance. Only use the processing tools in matched pairs and
insert each processing tool in its assigned tool hole in the bottom of the
motor housing. Do not use whisks and dough hooks together. Always ensure,
that the processing tools are engaged firmly before connecting the appliance to the mains
power supply (see Operation). Always handle the entire appliance and the tools with care
and without violence. Use the eject button, to remove the tools.
• Do not lift, pull or carry the appliance by the processing tools. To move or operate the
appliance, always hold on to the handle.
• Before use, always make sure that the appliance is properly and completely assembled
(see Operation).
10
Advertisement
Table of Contents
