Replace The Squeegee; Reset The Circuit Breaker - CleanMax Zoom Owner's Manual

How To
Replace the Squeegee –
Models ZM-400 and ZM-600
If your squeegee splits or begins to look
worn, simply remove the worn squeegee
from its track and slide a new one into
the track (Fig. 26). If you have trouble
installing the new squeegee, please return
to the place of purchase for assistance.

Reset the Circuit Breaker

Your vacuum features a circuit breaker
to protect the machine against damage
due to a surge in the electrical current.
Electrical surging can be a result of, though
not limited to, a jammed brushroll (i.e.
vacuuming up a throw rug) or a jammed
motor fan.
Should your vacuum cleaner experience a
jammed brushroll with the circuit breaker
tripping, first press the on/off button to the
off position and unplug the unit. Inspect
the brushroll by removing the bottom plate
(see "How to Remove Bottom Plate") and
remove any debris which may be causing
the jam. Reinstall the bottom plate (see
"How to Install Bottom Plate"), reset the
circuit breaker by pressing the Circuit
Breaker Reset Button (Fig. 27), plug in
power cord, and turn unit on. If the unit
fails to turn on, return to the place where
you purchased your CleanMax vacuum for
assistance.
Fig. 26
Circuit breaker
reset button
Fig. 27
16