Edge Cleaning; Automatic Carpet Height Adjustment; Bare Floor Cleaning; Jam Indicator - CleanMax Zoom Owner's Manual

Vacuum Features

Edge Cleaning

The edge cleaning feature provides improved cleaning
near walls and stationary furniture. For maximum edge
cleaning, place the left side of the nozzle against the
wall or stationary furniture.

Automatic Carpet Height Adjustment

Your vacuum is designed with an automatic, self-
adjusting nozzle. No manual adjustments are required.
The height of the nozzle is instantly and automatically
adjusted to the flooring surface. This self-adjusting
feature allows the nozzle to float evenly over all flooring
surfaces.
Bare Floor Cleaning - Models ZM-400 and ZM-600
The ZM-400 and ZM-600 models come equipped with
a squeegee on the bottom of the vacuum to improve
its effectiveness in cleaning bare floors. When cleaning
tile, hardwood, linoleum, etc., use the "on" setting,
as opposed to the maximum power setting, for best
results (see Fig. 13).
Fig. 13
Brushroll Jam Indicator - Model ZM-600
If an object, such as a throw rug or article of clothing
is ever picked up into your vacuum, the vacuum will
sense this "jammed brushroll" condition and turn off the
brushroll. When this happens, the "brushroll warning"
light on the top of the nozzle will flash in red
(see Fig. 14).
Turn off the vacuum and remove the cause of the jam.
Turn vacuum back on. If the brushroll is free of any
object and the "brushroll warning" light is still lit, it's
Fig. 14
likely the clogged condition is located in the vacuum
motor fan. If so, please return to the place where you
purchased your CleanMax vacuum for assistance.
11