Related Manuals for CleanMax CMPS-1T
Summary of Contents for CleanMax CMPS-1T
-
Page 1: Operating Instructions
LEAN OPERATING INSTRUCTIONS FOR C PRO SERIES LEAN UPRIGHT VACUUMS MODELS : CMPS-1T CMPS-1N Before operating the vacuum, please read these instructions completely. -
Page 2: Table Of Contents
Save These Instructions Before you plug in your CleanMax vacuum cleaner, make sure the voltage indicated on the rating plate located on the backside of the vacuum cleaner is the same as your local supply. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. When using an electrical appliance, basic precautions should always be followed, including the following: SAVE THESE INSTRUCTIONS. WARNING! To reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing. 2. -
Page 4: Grounding Instructions
Grounding Instructions This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. -
Page 5: Product View
Furniture plate guard Self-adjusting nozzle Replacement Bags and Filters • Genuine CleanMax Vacuum Bags • Genuine CleanMax HEPA Filter Part # 06.267 12 per package (Paper) Part # CMPS-HEPA Part # CMPSH-12 12 per package (HEPA) • Genine CleanMax Post Filter •... -
Page 6: How To Assemble And Operate The Vacuum
How to Assemble and Operate the Vacuum How to Attach the Handle to the Vacuum Cleaner The vacuum cleaner and the handle are packed separately. 1. After first removing the handle screw, insert handle into the hole on top of the vacuum cleaner. Make sure that the cord hook on the handle is positioned to the back of the vacuum cleaner (Fig. -
Page 7: Handle Adjustments
Fig. 2 Filters Your CleanMax vacuum cleaner is equipped with a secondary filter and either a post filter or a HEPA filter. These filters capture fine dust particles and protect the motor from dirt. It is important to change the filters regularly — approximately once a year, or as needed. -
Page 8: Automatic Self-Adjusting Nozzle
Automatic Self-Adjusting Nozzle Your CleanMax upright vacuum cleaner is designed with an Automatic Self-Adjusting Nozzle. No manual adjustments are required. The height of the nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature allows the nozzle to float evenly over all carpet pile surfaces. -
Page 9: How To Replace The Vacuum Belt
How to Replace the Vacuum Belt CAUTION: Unplug the vacuum cleaner before performing any of these steps. How to Remove the Bottom Plate 1. Place the vacuum cleaner in the low position (see page 6). Turn the vacuum over. 2. Slide the clips toward each other (Fig. 1). 3. -
Page 10: How To Clean The Nozzle Hose
The nozzle hose, located on the back of the vacuum cleaner, carries the dirt from the nozzle to the vacuum bag. The hose also functions as the attachment cleaning hose (on CMPS-1T model only). If the hose should become clogged 1. -
Page 11: Thermal Fuse Protection
Thermal Fuse Protection Your CleanMax vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut off your vacuum cleaner to avoid any potential damage. - Page 12 LEAN CleanMax Vacuum Cleaners PO Box 730 Fenton, MO 63026 ©2006 CleanMax Vacuum Cleaners.
Need help?
Do you have a question about the CMPS-1T and is the answer not in the manual?
Questions and answers