Table of Contents
Advertisement
3.5.7.1 Static Route
The static routing function determines the path that data follows over your network
before and after it passes through your router. You can use static routing to allow
different domain users to access the Internet through this Router.
To setup Static Routing, click on the Static Routing link in the left navigation bar,
show as below.
The screen contains the following details:
Filed
Interface
Destination IP
Subnet Mask
Gateway
Click "Add" to add the information that has been entered.
Click "CANCEL" to exit from this page without saving the changes.
Example:
Description
Select the direction of WAN or LAN.
Enter the IP Address of routing entry.
Enter the Subnet Mask of routing entry.
Enter the Gateway address of routing entry.
43
Advertisement
Table of Contents
