Planet Networking & Communication VC-200M User Manual page 50

Table 1 list 8a, 8b, 21a, 12b, and 17a standard VDSL2 profile about the bandwidth,
tones, tone spacing, and line power.
<Table 1>
To select VDSL2 profile, click on the ProfileConfig link in the left navigation bar,
show as below.
The screen contains the following details:
Setting
Profile
Click "CANCEL" to exit from this page without saving the changes.
Click "APPLY" at any time during configure to save the information that you
have been entered.
Note: By factory default is VDSL2 Profile 17a-Bandplan ITU AnnexB_B12.
Description
Select the ten standard VDSL2 profiles.
50