BMW X5 Wide screen monitor 16:9 retrofit kit Installation Instructions Manual page 3

1. Important information for installing the wide screen monitor
Only for use in the BMW dealer organisation.
The wide screen monitor may only be installed by a specialist workshop that has the required
special tools and manuals (servicing, repair, diagnostics, etc.).
These installation instructions are only valid for vehicle with board monitor 4:3 and
navigation computer Mark III.
Ensure that the cables/lines are not kinked or damaged as you install them in the vehicle.
Item numbers refer only to the overview drawings and to the texts next to the appropriate figure.
All work is shown on a LHD vehicle.
Proceed in exactly the same way on RHD vehicles.
Electrical knowledge is required.
Subject to technical modifications
Required tools and equipment
MoDIC III or DIS Angle cutter
1/4 inch socket set
Set of Philips screwdrivers
Set of flat screwdrivers
Cable lamp
Retrofit kit 65 90 0 136 732
Installation Instructions No. 01 29 0 141 872
!
Angle cutter
Oscillating saw
Flat file
Dust extractor
Issue date: 08.2001
US/3