Advertisement
4.
To install the wide screen monitor (vehicles with retrofitted 4:3 board monitor)
0
3
11
10
0
11
10
0
3
5
5
0
Retrofit kit 65 90 0 136 732
Installation Instructions No. 01 29 0 141 872
4
12
11
10
053 0252 B
12
1
053 0246 B
4
5
1
2
053 0254 B
Issue date: 08.2001
Secure the left wide screen monitor bracket (3) and
0
the right wide screen monitor bracket (4) to the
radio module holder (11) using the Philips screws
(10) and the securing screws (11) from the 4:3
board monitor you removed earlier.
Connect the blue 12-pin connector (10) and the
0
white 12-pin connector (11) to the 16:9 wide
screen monitor (1).
Then carefully slide the 16:9 wide screen monitor
(1) into the radio module bracket (12).
Secure the 16:9 wide screen monitor (1) to the left
0
wide screen monitor bracket (3) and the right wide
screen monitor bracket (4) with four fillister head
screws M3x8 (5).
When you fit the wide screen monitor trim
check the positions of the interlocks.
Place the wide screen monitor trim (2) on the
16:9 wide screen monitor (1).
5
!
US/8
Advertisement
