Polycom SoundStation IP 6000 Quick Start Manual page 3

For officesuite

Hide thumbs Also See for SoundStation IP 6000:

Quick Start Guide for the

Polycom SoundStation IP 6000

Conference Phone For OfficeSuite®

remaining two ports

Features of the Polycom SoundStation IP 6000 Conference Phone

Become familiar with the phone

Configuring the Polycom SoundStation IP 6000 Conference Phone

Pre-installation

1. Ensure an OS ext. # is assigned to this device and you know the PIN/password

2. Ensure a DID was assigned to this device

3. Select "Cannot be dialed" when setting Access from Auto-Attendant preference

4. If you purchased OfficeSuite FlexConnect, FlexConnect Small Office, OfficeSuite NW DIA

continue to the next section.

5. If you purchased OfficeSuite On-net or MPLS skip to that section.

If you connect to OfficeSuite via the Public Internet

To manually configure the Polycom with a static IP address and subnet mask, follow these steps:

1. Plug Polycom into LAN (PoE or Power brick where needed)

2. Plug Laptop into same LAN as Polycom

3. Obtain:

4. Single Static IP Address for this device

5. Subnet Mask

6. Default Gateway

7. In order to do so complete the following:

Need help?

Do you have a question about the SoundStation IP 6000 and is the answer not in the manual?