carownersmanual.net
carownersmanual.net
STEP
4
STEP
5
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by your Toyota dealer.
Vehicles without a smart key system: Wait for a few minutes
with the engine switch in the "ON" position and then turn the
engine switch to the "ACC" or "LOCK" position.
Vehicles with a smart key system: Wait for a few minutes with
the "ENGINE START STOP" switch in IGNITION ON mode
and then turn the "ENGINE START STOP" switch off.
4-3. Do-it-yourself maintenance
Press and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
4
369