Toyota Camry 2012 Owner's Manual page 22

1-2. Opening, closing and locking the doors and trunk
carownersmanual.net
carownersmanual.net
■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless
remote control.
STEP 1
Turn the "ENGINE START STOP" switch off.
STEP 2
When the indicator light on the key surface is not on, press and
hold
holding
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
Holding the driver's door handle
unlocks only the driver's door.
Holding the front passenger's door
handle unlocks all the doors.
Holding either front door handle
unlocks all the doors.
Vehicles with an alarm system: To prevent unintended triggering of the
alarm, unlock the doors using the wireless remote control and open and
close a door once after the settings have been changed. (If a door is not
opened within 60 seconds after
again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (→P. 95)
38
, , or
.
Unlocking doors
for about 5 seconds while pressing and
Exterior: Beeps 3 times
Interior: Beeps once
Exterior: Beeps twice
Interior: Beeps once
is pressed, the doors will be locked
Beep