Toyota Camry 2012 Owner's Manual page 196

carownersmanual.net
carownersmanual.net
●
Instances of the Blind Spot Monitor unnecessarily detecting a vehicle
and/or object may increase under the following conditions:
• When there is only a short distance between your vehicle and a guard-
rail, wall etc.
• When there is only a short distance between your vehicle and a follow-
ing vehicle.
• When vehicle lanes are narrow and a vehicle driving 2 lanes across
from your vehicle enters the detection area
■
The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be
difficult to see.
■
When there is a malfunction in the system
If a system malfunction is detected due to any of the following reasons,
warning lights will turn on: (→P. 421)
●
There is a malfunction with the sensors
●
The sensors have become dirty
●
The outside temperature is extremely high or low
●
The sensor voltage has become abnormal
■
Certification for the Blind Spot Monitor
FCC ID: OAYBSDTX
This device complies with part 15 of the FCC Rules. Operation is subject to
the following three conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
(3) This device may only work when the vehicle is in operation pursuant to
§ 15.252 (a) (4).
FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
2-4. Using other driving systems
2
211