Windsor TC17/2OlFE Operating Instructions Manual page 10

TRIDENT COMPACT 17" 230V/240V
MAINTENANCE
SQUEEGEE
ASSEMBLY
Before and during use of machine, use a damp cloth to
wipe the outside and inside of squeegee to remove
buildup of foreign material on the squeegee blades.
This prevents streaking and residue on the floor.
wear:
Squeegee
After extended use, the squeegee blades will wear. To
improve squeegee performance and extend wear, pro-
ceed as follows:
Turn off all switches and place the machine
on
a level surface. Raise the squeegee to
the transport position.
2. Loosen knobs on the
sides of squeegee until squeegee can be
removed from the squeegee bracket.
Loosen the fasteners on front of squeegee
3 .
to replace or adjust front blade.
4. Unlatch rear squeegee latch to replace rear
blade.
Adjusting Squeegee Assembly
1. Lower the squeegee and move the machine
forward.
2.
even curl along the length of the blade. Use
camber adjustment knob to achieve even curl if
required.
Adjust the down pressure nut located on
3 .
squeegee mounting assembly. Do not apply
excessive force.
left
and right hand
SQUEEGEE DEFLECTION
INCORRECT
I
NOTENOUGH
Page of 27