Ip Trunk Group - SunComm SC-1695i User Manual

4.11.2 IP Trunk Group

IP Trunk Group
Index
Description
IP
Example
To add an IP group, set IP "10, 14, 17" to IP group 18
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
Figure 4-11-3 IP Trunk Group
Table 4-11-2 Description of IP Trunk Group
This configuration is optional, and is used to add the IP that have the
same attributes to an IP group. The IP group will referenced by IP->Tel
routing and number manipulation.
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.
It describes the route for the ease of identification. Its value is character
string
It specifies the IP will add to IP group
Figure 4-11-4 IP Trunk group modify
User Manual
39