Tel->Ip Routing - SunComm SC-1695i User Manual

manipulation number manipulation completed
4.7.2 IP->Tel Routing
IP ->Tel Routing
Index
Description
Source IP
Source Prefix
Destination Prefix
Destination
4.7.3 Tel->IP Routing
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
Figure 4-7-2 IP to Tel Routing
Table 4-7-2 Description of IP to Tel Routing
This item uses to configure outgoing call routes which can be used for recieve the
calls from the GSM
It uniquely identifies a route. Its value is assigned globally, ranging from 0 to 31.
The route preferentially match the rules which the value of index is smaller
It describes the route for the ease of identification. Its value is character string
It specifies the IP of the caller
All the caller number must match the source prefix. It specifies the source prefix
allow to send call out
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
All the called number must match the destination prefix, the call prefix indicates
the connected number
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Its specifies destination Port or Port Group
Figure 4-7-3 Tel to IP Routing
User Manual
25