Operation; Ip->Tel Operation - SunComm SC-1695i User Manual

4.9 Operation

4.9.1 IP->Tel Operation
IP->Tel Operation
Index
Source IP
Source Prefix
Destination Prefix
Operation
Description
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
Figure 4-9-1 IP->Tel Operation
Table 4-9-1 Description of IP->Tel Operation
It is an optional configuration item. Operation configuration essentially
involves allow, barring some IP and IP Group send calls to certain
numbers. It includes: forbid call, call allowance, auto call, and password
authentication.
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.
It specifies the source IP which will send the calls to gateway
 Any: any IP address
 IP: specific an IP address
 IP Group: specific an IP group
All the caller number must match the source prefix. It specifies the
source prefix allow to send call out
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
All the called number must match the destination prefix, the call prefix
indicates the connected number
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Its specifies number analysis rule
 Forbid call
 Allow call
 Auto call
 Password authenticate
It describes the route for the ease of identification. Its value is character
string
User Manual
34