Manipulaton Configuration; Ip->Tel Destination Numbers - SunComm SC-1695i User Manual

4.8 Manipulaton Configuration

4.8.1 IP->Tel Destination Numbers
Figure 4-8-1 IP->Tel destination numbers manipulation
Table 4-8-1 Description of IP->Tel destination numbers manipulation
IP->Tel destination
numbers
manipulation
Index
Description
Source IP
Source Prefix
Destination Prefix
Destination
Stripped Digits from
Left
Stripped Digits from
Right
Prefix to Add
Suffix to Add
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
It is an optional configuration item, and is used to add a rule for
changing number
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.The route preferentially match the rules which the value
of index is smaller
It describes the rule for the ease of identification. Its value is character
string
It specifies the source IP which will send the calls to gateway
 Any: any IP address
 IP: specific an IP address
 IP Group: specific an IP group
All the caller number must match the source prefix. It specifies the
source prefix allow to send call out
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
All the called number must match the destination prefix, the call
prefix indicates the connected number
 Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
 0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Its specifies destination Port or Port Group
It specifies the length of the digits to be deleted from left
It specifies the length of the digits to be deleted from right
Add the new digits in front of the original number
Add the new digits at the end of the original number
User Manual
29