Ip Setting - SunComm SC-385 User Manual

7. IP Setting

The operator can setup or query the network parameters by dialing in the
mobile number which it SIM card has been put in the main body. The
status or result is response by voice. In the first 20 seconds after
power-on, the VoIP GSM Gateway enters the IP setting mode. The
operator may dial in the mobile number during this period to set or query
the network parameters.
Item IVR Action
1 Reboot
2 Factory Reset
3 Check IP Address #120#
4 Check IP Type
5 Check Network
Mask
6 Check
IP
IVR Menu Choice
#195#
#198#
#121#
#123#
Gateway #124#
After you hear "Option
Successful," hang-up. Unit will
reboot automatically.
System will automatically
Reboot. WARNING: ALL
User-Changeable"
NONDEFAULT SETTINGS
WILL BE LOST! This will
include network and service
provider data.
IVR will announce the current
IP
address
192.168.0.100
IVR will announce if DHCP is
enabled or disabled.
default : OFF
IVR will announce the current
network mask. Default :
255.255.255.0
IVR will announce the current
gateway IP address,
-5-
Notes
, Default :