Sim/Uim Card Lock - SunComm SC-1695i User Manual

Duration duration. After the call duration excesses this value, no call will be made from
this channel. The value range is 1-65535. If user doesn't configure this value,
Default is no max call duration limits for this channel.
Minimum A minimum charging time (in seconds) is defined during which no charging is
Charging Time done at carrier side. If the conversation time is even shorter, the total call
duration will not decrease.
Mobile Number The mobile phone No. which used to receive the alarm SMS. Users can get
（Receiving
SMS report of SIM/UIM card status(SIM Remain Time) in DWG.
Alarm）
Alarm Threshold When the SIM remain time is or less than this value, DWG will send the alarm
（via SMS）
SMS to remind the users of the SIM remain time.
Port Description It is the identification mark of SIM/UIM card in the SMS report. The mobile
for Alarm phone No. of the SIM/UIM card is recommended to use as the port description
for alarm, or any other string.
SIM Remain Indicates the current sim remain time. It can't modified
Time
Restore time Recovers the SIM remain time to initial value, the Maximum Call Duration.
CLIR Caller ID display restrict. This function is used to restrict the mobile phone
No. By adding "#31#" before the mobile phone ID, this funciton should be
supported by carrier.
Mobile Tx Gain Transits gain of the mobile module, from IP side to PSTN side.
Mobile Rx Gain Receives gain of the mobile module,from PSTN side to IP side.
Detect Reverse This option for CMDA Reverse Polarity detection. Most CDMA operators
Polarity don't offer polarity reverse . So VoIP to mobile, SC-1695 will connect soon. It
doesn't wait mobile side answer.

4.6.3 SIM/UIM Card Lock

_______________________________________________________________________________
SunComm Technologies Co., Ltd.
Figure 4-6-3 Configuration of SIM/UIM Card Lock
User Manual
20