SunComm SC-1695i User Manual
  1. Manuals
  2. Brands
  3. SunComm Manuals
  4. Gateway
  5. SC-1695i
  6. User manual

SunComm SC-1695i User Manual

With 16 sim
Hide thumbs
Table of Contents

Advertisement

Quick Links

SC-1695i User's Manual
SC-1695i with 16 SIM
User Manual
V1.1
Table of Contents

Advertisement

Table of Contents
loading

Related Manuals for SunComm SC-1695i

Summary of Contents for SunComm SC-1695i

  • Page 1 SC-1695i User’s Manual SC-1695i with 16 SIM User Manual V1.1 Table of Contents...

  • Page 2: Table Of Contents

    4.5.3 VPN Parameter ....................... 16 4.5.4 ARP ........................17 4.6 Mobile Configuration ......................18 4.6.1 Basic Configuration ....................18 4.6.3 SIM/UIM Card Lock ....................20 4.6.4 PIN Management ....................21 4.6.5 SMSC ........................21 4.6.6 SMS ........................22 _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 3: Equipment Introduction

    4.14.6 Login Password ....................51 4.14.7 Factory Reset ......................52 4.14.8 Restart ........................52 5. FAQ ............................. 52 6. Glossary ............................55  1. Equipment Introduction This chapter mainly introduces functions and structures of SC-1695i. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 4: Introduction

    User Manual 1.1 Introduction SC-1695i is full functions VoIP gateway based on IP and GSM wireless network, which provides a flexible network configuration, powerful features, and good voice quality. It works for carrier grade, enterprise, SOHO, residential users for cost-effective solution.

  • Page 5: Functions And Features

    1.4.3 Industrial Standards Supported  Stationary use environment: EN 300 019: Class 3.1  Storage environment: EN 300 019: Class 1.2  Transportation environment: EN 300 019: Class 2.3  Acoustic noise: EN 300 753 _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 6: General Hardware Specification

    This chapter mainly introduces SC-1695i hardware installation and connection of equipment. 2.1 Installation Notice SC-1695i uses AC power. Power supply should ensure the reliability and stability,otherwise, it may damage the SIM card or device. In addition, make sure the power supply connects to ground bar well.

  • Page 7: Installation Procedure

    2) Inset the SIM card to the SIM slot 3) Push in the GSM user board  3. Network Configuration In this chapter we will introduce the initial configuration of SC-1695i. All of the network parameters of the gateway can be configured by IVR guidance. 3.1 Attentions In each step, if user hears an IVR message of “setting successful”, which means that user has...

  • Page 8: General Feature Codes For System Setting

    3.3 Static IP Configuration This chapter introduces IP configuration of SC-1695ithrough calling IVR. Assuming the IP address of a SC-1695i device is 192.168.1 200, subnet mask is 255.255.255.0, IP of gateway is 192.168.1.1, configured as follows: 1) Please make sure hardware installation have finished 2) Dial the phone number of the SIM card.

  • Page 9: Dhcp Configuration

    This charpter describes web configuration of SC-1695. 4.1 Access the System Through HTTP Enter IP address of SC-1695 in browser. The default IP of LAN port is 192.168.11.1. and the GUI shows as below: Figure 4-1-1 WEB log interface _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 10: Web Configuration

    Go through navigation tree, user can check, view modify, and set the device configuration on the right of configuration interface. 4.3 System Information System information interface shows the basic information of status information, Mobile _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 11: System Information

    Calculates the netflow, including the total bytes of message received and sent. Version info shows the current firmware version 4.3.2 Mobile Information Figure 4-4-3 Mobile information Table 4-4-2 Description of mobile information Port Number of GSM/CDMA ports . _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 12: Sip Information

    Show the Status of port, include idle and active "Idle" means there is no call on this channel "Active" means the call is 4.3.3 SIP Information Figure 4-4-4 SIP information Displays registration status information with Softswitch platform or SIP Server _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 13: Statistics

    Show the status of port, Include "onhhok" and "offhook" 4.4 Statistics 4.4.1 TCP/UDP Figure 4-4-4 TCP/UDP Statistics 4.4.2 RTP Table 4-5-1 Description of RTP Statistics Port The port of RTP statistics Payload Type The voice code of this channel, Include G.723.1/PCMA/PCMU/G.729AB _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 14: Call History

    The amount of outgoing calls which attempted to IP part Outgoing Connected The amount of outgoing calls which have connected Outgoing Answered The amount of outgoing calls which answered by IP part Outgoing Failed The amount of outgoing calls which failed _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 15: Network Configuration

    Need ISP offer the account and password. Use this mode when there PPPoE is not router in the local network. Obtain DNS Server When enable the WAN port option of "Obtain DNS Server Address Address Automatically Automatically" , which will be enabled subsequently. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 16: Vlan Parameter

    User Manual Use the Following DNS Fill in the IP address of "Primary DNS Server" and "Secondary DNS Server Addresses Server" 4.5.2 VLAN Parameter Figure 4-5-2 VLAN Parameter _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 17: Vpn Parameter

    Internet, to provide remote offices or traveling users access to a central organizational network. VPNs typically require remote users of the network to be authenticated, and often secure data with encryption technologies to prevent disclosure of private information to unauthorized parties. Figure 4-5-3 VPN Parameter _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 18: Arp

    IP address and a MAC address. Gateway provides you the ability to add static ARP entries to:  Protect your network against ARP spoofing  Prevent network confusion as a result of misconfigured network device Figure 4-5-4 ARP Figure 4-5-5 Add ARP _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 19: Mobile Configuration

    The API includes SMS sending and receiving, USSD sending and receiving. The default is "No" API Server Address It is the remote IP address who uses API. This is an option when selecting "Yes" under 'remote API enable" _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 20 This function is to limit the max call duration of channel. The max call Duration duration is between 1 to 65535 minutes. Limitation Maximum Call Defines a value by users. That will limit the SIM/UIM card’s total call _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 21: Sim/Uim Card Lock

    This option for CMDA Reverse Polarity detection. Most CDMA operators Polarity don't offer polarity reverse . So VoIP to mobile, SC-1695 will connect soon. It doesn't wait mobile side answer. 4.6.3 SIM/UIM Card Lock Figure 4-6-3 Configuration of SIM/UIM Card Lock _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 22: Pin Management

    PIN can be modified to prevent SIM card from being stolen. Select Port Selects the GSM/CDMA channel No. Old PIN code The previous PIN code New PIN code Inputs a new PIN code 4.6.5 SMSC Figure 4-6-5 SMSC _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 23: Sms

    No to send SMS. Addressee Mobile phone No. of the receiver Message Content of the SMS. The length is limited to 300 characters. 4.6.7 USSD USSD (Unstructured Supplementary Service Data) is a Global System for Mobile(GSM) _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 24: Carrier

    Table 4-6-6 Description of select Carrier Select Port Select GSM channel,default Port 0 Select Mode There are two mode to select carrier,automatic and manual. Carrier List If you select manual mode,you can select carrier from carrier list. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 25: Routing Configuration

    Globle parameters, it will take effect while number manipulation configured Route calls after The parameters indicate that the gateway will select Tel->IP routes after manipulation number manipulation completed Route calls before The parameters indicate that the gateway will select Tel->IP routes before _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 26: Tel->Ip Routing

     Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.  0xxxx: consist of some digits such as 015,08,09 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 Destination Its specifies destination Port or Port Group 4.7.3 Tel->IP Routing Figure 4-7-3 Tel to IP Routing _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 27  Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.  0xxxx: consist of some digits such as 015,08,09 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 Destination Its specifies destination Port or Port Group Figure 4-7-4 Tel to IP routing Modify _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 28 ”x.”, ”x.” is a wildcard string which will match any prefix except ”anonymous” calls. Meanwhile sending the calls destination IP 13<eia> if called number match with destination prefix ”00”. Figure 4-7-6 Tel to IP routing Modify _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 29 Port 0 will match the prefix 13[58], ”13[58]” include prefix 135 and 138, caller number can’t match prefix 135 and 138 will reject by gateway. Meanwhile sending the calls to Port Group 31<Unicom> if called number match with prefix 133. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 30: Manipulaton Configuration

    It specifies the length of the digits to be deleted from right Right Prefix to Add Add the new digits in front of the original number Suffix to Add Add the new digits at the end of the original number _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 31: Tel->Ip Source Numbers

    IP->Tel routing. It uniquely identifies a route. Its value is assigned globally, ranging Index from 0 to 31. It describes the rule for the ease of identification. Its value is character Description string _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 32 It indicates that calls coming from IP Group will match the prefix ”any”, and the called nubmer which match with the prefix ”2547” will delete 3 digits in front of it and replace it by digit ”0”. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 33: Tel->Ip Destination Numbers

    Add the new digits in front of the original number Suffix to Add Add the new digits at the end of the original number Number of Digits to It specifies the number of Digits to Leave from Right Leave from Right _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 34 It indicates that calls coming from IP Group will match the prefix ”any”, and the called nubmer which match with the prefix ”2547” will delete 3 digits in front of it and replace it by digit ”0”. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 35: Operation

    1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 Its specifies number analysis rule  Forbid call Operation  Allow call  Auto call  Password authenticate It describes the route for the ease of identification. Its value is character Description string _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 36: Tel->Ip Operation

    07 are not allowed call out. The calls match this rule will be rejected by gateway. Index 29: definite a rule for IP 17<FreeSentral> that all the calls must go with valid password authentication. Figure 4-9-3 IP->Tel Operation Modify 4.9.2 Tel->IP Operation Figure 4-9-4 Tel->IP Operation _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 37 1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186 Its specifies number analysis rule  Forbid call Operation  Allow call  Auto call  Password authenticate It describes the route for the ease of identification. Its value is character Description string _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 38: Port Group Configuration

    User Manual 4.10 Port Group Configuration 4.10.1 Port Group Figure 4-10-1 Port Group Figure 4-10-2 Port Group Modify _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 39: Ip Trunk Configuration

    It is an interworking parameter between the remote Softswitch and the Port SIP server. It specifies the SIP port number of the peer equipment Example To add a remote IP of Softswitch, set “index” to “31”, SIP port number “5060” Figure 4-11-2 IP Trunk Modify _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 40: Ip Trunk Group

    It describes the route for the ease of identification. Its value is character Description string It specifies the IP will add to IP group Example To add an IP group, set IP “10, 14, 17” to IP group 18 Figure 4-11-4 IP Trunk group modify _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 41: System Configuration

    4.12.1 Service Configuration Service Configuration is used for configuring voice calls and some small businesses, such as Call Progress Tone, codec, silence suppression, * service, the second dial and so on Figure 4-12-1 Service Configuration _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 42 Means the initial port when RTP voice stream transmit in the IP network , in general, using the factory default values. When there are multiple LOCAL RTP PORT SUNCOMM series voice products, and the network gateway or router’s Channel NAT with loopholes, user can try changing this item Enable Silence Enable the "silence suppression"...

  • Page 43: Sip Configuration

    Use # as End Key No, the dial-up will end expires dial-up time Bit of between the dialing time ,over the time will be seem as end of dial Interdigit Timeout 4.12.2 SIP Configuration Figure 4-12-2 SIP Configuration _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 44 The DNS query type defines the type of information that will be requested DNS query type from DNS server DNS refresh The interval of DNS refresh, Range from 0 to 60000 mins, 0 means disable interval default value is disable. _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 45: Port Configuration

    Used to config the compatibility of SIP Response Code , Fill the response Response Code code in the front , and Fill the switch code in the behind switch 4.12.3 Port Configuration Figure 4-12-3 Port Configuration _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 46: Digit Map

    PSTN part. Leave it blank if you don’t need this function. *Note: Please config IP->Tel Operation if you need this function. Auto-Dial Delay Time The auto-dial delay time of hotline , the range is 0-10 seconds 4.13 Digit Map Figure 4-13-1 Digit map _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 47 +: Match 1 or more times. 9. Modifiers ?: Match 0 or 1 times. Example: Assume we have the following digit maps: 1. xxxxxxx | x11 and a current dial string of "41". Given the input "1" the current dial _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 48: Tools

    Means that first is "13","15" or "18", followed by 8 digits. 4. [1-357-9]xx Means that first is "1","2","3" or "5" or "7","8","9", followed by 2 digits. 4.14 Tools 4.14.1 Firmware Upload Figure 4-14-1 Firmware upload _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 49 During the upgrade process, please do not swtich off the power supply, equipment may paralyze. 4.14.2 Management Parameter Figure 4-14-2 Management Parameter Table 4-14-1 Management Parameter Voice Prompt Language Select the language of voice prompt. There are two kind of voice : English and Chinese _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 50: Data Backup

    User need to fill the NTP Server Address and select Time Zone 4.14.3 Data Backup Figure 4-14-3 Data backup Click 'Backup' for download configuration file to your computer. 4.14.4 Data Restore Figure 4-14-4 Data restore _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 51: Ivr Voice Prompt Upload

    Ping is utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination host. Figure 4-14-6 Ping Test _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 52: Login Password

    Traceroute is a computer network diagnostic tool for displaying the route (path) and measuring transit delays of packets across an Internet Protocol (IP) network. Figure 4-14-7 Tracert Test 4.14.8 Login Password Figure 4-14-8 IVR Voice Prompt Upload _______________________________________________________________________________ SunComm Technologies Co., Ltd.

  • Page 53: Factory Reset

    Be careful do this operation, after restore factory setting, all the parameters will be changed to the factory default. 4.14.10 Restart Figure 4-14-10 Restart 5. FAQ 5.1 Device have been connected to network physically, but can not access the gateway _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 54 3) Make sure whether the LAN equipment such as gateway or router fails, user can try to restart the gateway or router 5.5 voice single-pass, double-barrier or poor quality 1) Make sure the equipment is working properly with grounded power _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 55 4) Make sure the LAN equipment is working, user can try to restart the gateway or router to solve the problem 5) Check whether there is more than one SUNCOMM series products in LAN network: some gateways or routers, processing network packet is vulnerable (for example, to multiple network devices or the same protocol network communication, NAT allocated the same conversion communications Channel).

  • Page 56: Glossary

    DTMF: Dual Tone Multi Frequency USSD: Unstructured Supplementary Service Data PSTN：Public Switched Telephone Network STUN: Simple Traversal of UDP over NAT IVR: Interactive Voice Response IMSI: International Mobile Subscriber Identification Number IMEI: International Mobile Equipment Identity DMZ: Demilitarized Zone _______________________________________________________________________________ SunComm Technologies Co., Ltd.
  • Page 57 User Manual _______________________________________________________________________________ SunComm Technologies Co., Ltd.

Table of Contents