Sip Information - SunComm SC-1695i User Manual

Type Indicates the current type of network. Such as CDMA or GSM
IMSI International Mobile Subscriber Identity, it is the uniquely identifies of SIM card
Status Indicates the connection status of current GSM / CDMA module
Remaining Limite a call duration to the SIM card, when call duration is out of that duration,
Call Duration the call would be discontinued. This option shows remaining talk time.
Carrier Displays the network carrier of current SIM card.
Signal Quality Displays the signal strength of in each channels of GSM / CDMA.
ASR Answer Seizure Ratio is a measure of network quality. Its calculated by taking
the number of sucessfully answered calls and dividing by the total number of
calls attempted . Since busy signals and other rejections by the called number
count as call failures, the ASR value can vary depending on user behaviour.
ACD The Average Call Duration (ACD) is calculated by taking the sum of billable
seconds (billsec) of answered calls and dividing it by the number of these
answered calls.
PDD Post Dial Delay (PDD) is experienced by the originating customer as the time
from the sending of the final dialled digit to the point at which they hear ring
tone or other in-band information. Where the originating network is required to
play an announcement before completing the call then this definition of PDD
excludes the duration of such announcements.
Call Status Show the Status of port, include idle and active
"Idle" means there is no call on this channel
"Active" means the call is

4.3.3 SIP Information

Displays registration status information with Softswitch platform or SIP Server
_______________________________________________________________________________
SunComm Technologies Co., Ltd.
Figure 4-4-4 SIP information
User Manual
11