Getting Help - ENCAD Croma 24 Getting Started

Croma24 Getting Started for Macintosh
11. Printing with the driver 11. Printing with the driver
The driver must be installed before you can print to
the Croma24 from within your application software.
Defaults have been pre-selected to streamline
printing and produce optimum quality from the
Croma24. Refer to the User Guide on the Croma24
System CD-ROM for descriptions of all the selections
available in the Croma24 driver.
1. Select Page Setup from the File menu.
2. In Page Size, select the closest page size that
matches your image. If not shown, select
Custom.
Note: Add one inch to the length of your page.
The maximum width is 23.25 inches.
3. Select the Media you are using.
4. Click OK.
5. Select Print from the File menu and click on the
Print button.
5. When the image finishes printing, click the
scissors icon on the driver or click the scissors
button on the front of the printer to cut the print.
Copyright © ENCAD, Inc. 2000, All Rights Reserved.
ENCAD ® and Croma24™ are trademarks of ENCAD, Inc. FastPort is a trademark of DIGI
International. Macintosh, iMac, Mac and G4 are trademarks of Apple Computer.
8

12. Getting help

12. Getting help
If you have problems during the setup procedures,
refer to "Quick Fixes" in the Users Guide on the
System CD-ROM. Also refer to your Users Guide for
details on:
• software driver selections
• media handling
• optimizing print quality
• maintenance
You may also want to check ENCAD's web site to see
the latest technical bulletins and download test files
and drivers.
http://www.encad.com
You can also call ENCAD Technical Support:
(877) 362-2387 (Monday - Friday, 6 a.m. to 5 p.m.,
Pacific time).