Connecting Cables; Print Server - ENCAD Croma 24 Getting Started

Croma24 Buttons and Indicators
Move media
backward
Load media
Move media
forward
Cut
Ready to Print
indicator
Power On
User Intervention
indicator
FastPort

Print Server

Croma24 Getting Started for Macintosh

4. Connecting Cables

4. Connecting Cables
1. Turn off power to the computer. (Printer should be
unplugged.)
2. Plug the FastPort into the parallel port on the back of
the printer. (Figure 3)
3. Plug one end of the crossover (network) cable into
the RJ45 jack on the back of the Macintosh. (Figure 1
for G4 connection or Figure 2 for iMac)
4. Plug the other end of the crossover cable into the
FastPort RJ45 jack. (Figure 3)
5. Plug the DC power cord from the power converter
into the DC receptacle on the FastPort.
6. Plug the power converter into an AC power source
(wall outlet).
7. Plug the AC power cord into the receptacle on the
back of the printer. Plug the other end into a
grounded electrical outlet. The printer will automati-
cally come on.
3