Table of Contents
Advertisement
nipulated using the IS Admin program included with the
device.) Start your Telnet or browser software and enter
the IP address of the internet server (either the default IP
listed above or the new address you assigned using IS
Admin). This should bring up the internet server start
menu. See the next series of steps for information about
settings that must be set for the device to work properly.
Mandatory Settings for Internet Access
Step 8:
ISP Account -> Phone Number, when you signed-up
for an account with your ISP (internet service provider),
you should have been given an access phone number that
your modem will dial. Look under the "WAN Port Set-
tings" menu for this item and enter the phone number
provided by your ISP.
Step 9:
ISP Account -> User ID, your ISP should also have
assigned a User ID (aka, a username) that you will use for
logging-in. Also under "WAN Port Settings," enter this
user ID exactly as it was provided to you.
Step 10:
ISP Account -> Password, finally, to complete the
ISP login process, the internet server must provide the
password associated with the user ID assigned by your
ISP. Enter it.
You have now completed the basic steps necessary to install, con-
figure, and begin using the internet server.
respect to steps 8–10, it may be necessary for you to use a "Login
Script" instead. If you enter the information required in those
three settings correctly and still have trouble logging-in, see the
"Login Script" section on page 29 to create a login script.
Quick Installation
Internet Server User's Guide
Note that, with
xiii
Advertisement
Table of Contents
