Ip Reserve Table; Server Address Configuration - D-Link DP-692 User Manual

Internet server/hub
Table of Contents

Advertisement

Internet Server User's Guide
Default Value: 1440 (24 hours)
Description: Dynamically assigned addresses can be peri-
odically "refreshed" by a DHCP server. The IP Lease Time
variable allows you to set that time limit. If a time is en-
tered in this variable, each dynamically assigned address
will be recycled at the end of the lease time.

IP Reserve Table

Options: Local IP Address, MAC Address (a maximum of
16 separate line entries).
Default Value: (none)
Description: The IP reserve table specifies ownership of
particular IP addresses by particular stations or servers
(identified by MAC address) so that those IP addresses will
not be used by other devices on the LAN under any circum-
stances.
(Note that devices listed in the Server Address
Settings table should have their IP addresses listed here if
DHCP is going to be used so that their IP addresses don't
get assigned to other network stations.)

Server Address Configuration

The Server Address Configuration table allows you to setup local
servers, for example an FTP or web site, and provide non-local
access to them through the internet server. Entries in the table
associate a port number with the local IP of a particular LAN
server so that users not on the LAN can access that server.
The internet server supports virtual internet servers so that your
single-point ISP internet access can be used to provide externally-
accessible servers for FTP and HTTP. "Virtual Servers" in this
44
Configuration Settings

Advertisement

Table of Contents
loading

Table of Contents